Hand-knitting
Hand-knitting is a special case of knitting, in which the knitted fabric is produced by hand.
Embroidered T-Shirt
Weft-knit fabrics can be divided into two types: those that have selvages (side edges) and those that are tubes, where the side edges have been joined. The former are knit using "flat knitting", whereas the latter are knit using "circular knitting", also known as "knitting in the round".
In flat knitting, the hand-knitter generally knits from right-to-left on one side of the fabric, turns the work (over), and then knits right-to-left back to the starting position. Usually one side of the fabric is considered the right side, the one that faces outwards for viewing; the side that faces inwards, towards the body, is known as the wrong side. Thus, flat knitting involves knitting one row on the right side, then one row on the wrong side, etc. Stitches knit on the wrong side are reversed in appearance; for example, a knit stitch carried out on the wrong side will appear as a purl stitch on the right side, and vice versa. Thus, the uniform stockinette fabric requires that the hand-knitter knit all the stitches on the right side, and purl all the stitches on the wrong side. For comparison, garter-stitch fabric is produced if the knitter knits (or purls) every stitch in every row, regardless of which side is being worked.
In circular knitting, the knitter generally knits everything from one side, usually the right side. Circular knitting is usually carried out on a single circular needle, although this becomes more difficult as the radius of the tube gradually shrinks. In such cases, the knitter can resort to a variety of alternative techniques, such as double-pointed needles, knitting on two circular needles,[1] a M?bius strip-like "magic needle" approach, or careful use of slip-stitch knitting or equivalently double knitting to knit the back and front of the tube.
There are well-nigh an infinite number of possible combinations of knitting stitches, the favorites of which have been collected into stitch treasuries.[2] A piece of knitting begins with the process of casting on (also known as "binding on"), which involves the initial creation of the stitches on the needle. Different methods of casting on are used for different effects: one may be stretchy enough for lace, while another provides a decorative edging ??Provisional cast-ons are used when the knitting will continue in both directions from the cast-on. There are various method employed to "cast on," such as the "thumb method" (also known as "slingshot" or "long-tail" cast-ons), where the stitches are created by a series of loops that will, when knitted, give a very loose edge ideal for "picking up stitches" and knitting a border; the "double needle method" (also known as "knit-on" or "cable cast-on"), whereby each loop placed on the needle is then "knitted on," which produces a firmer edge ideal on its own as a border; and many more. The number of active stitches remains the same as when cast on unless stitches are added (an increase) or removed (a decrease).
Most Western-style knitters follow either the English style (in which the yarn is held in the right hand) or the Continental style (in which the yarn is held in the left hand). A third but less common method, called combination knitting, may also be used.
Once the knitted piece is finished, the remaining live stitches are "cast off." Casting (or "binding") off loops the stitches across each other so they can be removed from the needle without unravelling the item. Although the mechanics are different from casting on, there is a similar variety of methods.
In knitting certain articles of clothing, especially larger ones like sweaters, the final knitted garment will be made of several knitted pieces, with individual sections of the garment knit separately and then sewn together. Seamless knitting, where a whole garment is knit as a single piece, is also possible. Elizabeth Zimmermann is probably the best-known proponent of seamless or circular knitting techniques. Smaller items, such as socks and hats, are usually knit in one piece on double-pointed needles or circular needles. (See Circular knitting.)
One of the earliest known examples of knitting was finely decorated cotton socks found in Egypt in the end of the first millennium AD.[4] The first knitting trade guild was started in Paris in 1527. [5] With the invention of the knitting machine, however, knitting "by hand" became a useful but non-essential craft. Similar to quilting, spinning, and needlepoint, knitting became a social activity.
Hand-knitting has gone into and out of fashion many times in the last two centuries, and at the turn of the 21st century it is enjoying a revival. According to the industry group Craft Yarn Council of America, the number of women knitters in the United States age increased 150% in the two years between 2002 and 2004.[6] While some may say knitting has never really gone away, this latest reincarnation is less about the make do and mend of the 1940and 50 and more about making a statement about individuality as well as developing an innate sense of community. Additionally, many contemporary knitters have an interest in blogging about their knitting, patterns, and techniques.[7]
There are now numerous groups that are not only growing individually, but also forming international communities. Communities also exist online, with blogs being very popular, alongside online groups and social networking through mediums such as Yahoo! Groups, where people can share tips and techniques, run competitions, and share their patterns. More people are finding knitting a recreation and enjoying the hobby with their family. Knitting parties also are becoming popular in small and large communities around the U.S. and Canada.
The oral histories of many knitters have been collected, and suggest that hand-knitting is often associated with compassion.[8] "I knit love into every stitch" is a common refrain.
Knitting especially large or fine garments such as sweaters can require months of work and, as gifts, may have a strong emotional aspect. The so-called sweater curse expresses the experience that a significant other will break up with the knitter immediately after receiving a costly hand-knit gift such as a sweater. A significant minority of knitters claim to have experienced the sweater curse; a recent poll indicated that 15% of active knitters say they have experienced the sweater curse firsthand, and 41% consider it a possibility that should be taken seriously. Although sometimes labeled a "superstition", the sweater curse is not treated in knitting literature as anything paranormal.
Hand-knitting is generally relaxing and repetitive, Some practitioners have noted that these factors, combined with its compassionate nature, make hand-knitting well-suited for meditational or spiritual practice.
Knitting is sometimes featured in literature. Knitting and its techniques may be used as a metaphor; its meditative and spiritual aspects may be emphasized; it may signal various types of domesticity; or it may be used for dramatic irony, as when an apparently harmless knitter proves deadly and implacable. Examples from 19th century novels include Madame Thse Defarge in Charles Dickens' A Tale of Two Cities, Anna Makarovna in Leo Tolstoy's War and Peace, various characters in Jane Austen's novels and Miss Ophelia in Harriet Beecher Stowe's Uncle Tom's Cabin. Several characters in Virginia Wolff's novels are knitters. In the first decade of the 21st century, knitting has been a key element in several novels[16] and even murder mysteries.
Yarn for hand-knitting is usually sold as balls or skeins (hanks), although it may also be wound on spools or cones. Skeins and balls are generally sold with a yarn-band, a label that describes the yarn's weight, length, dye lot, fiber content, washing instructions, suggested needle size, likely gauge, etc. It is common practice to save the yarn band for future reference, especially if additional skeins must be purchased. Knitters generally ensure that the yarn for a project comes from a single dye lot. The dye lot specifies a group of skeins that were dyed together and thus have precisely the same color; skeins from different dye-lots, even if very similar in color, are usually slightly different and may produce a visible stripe when knitted together. If a knitter buys insufficient yarn of a single dye lot to complete a project, additional skeins of the same dye lot can sometimes be obtained from other yarn stores or online.
The thickness of the yarn is a significant factor in determining the gauge, i.e., how many stitches and rows are required to cover a given area for a given stitch pattern. Thicker yarns generally require thicker knitting needles, whereas thinner yarns may be knit with thick or thin needles. Hence, thicker yarns generally require fewer stitches, and therefore less time, to knit up a given garment. Patterns and motifs are coarser with thicker yarns; thicker yarns produce bold visual effects, whereas thinner yarns are best for refined patterns. Yarns are grouped by thickness into six categories: superfine, fine, light, medium, bulky and superbulky; quantitatively, thickness is measured by the number of wraps per inch (WPI). The related weight per unit length is usually measured in tex or dernier.
Before knitting, the knitter will typically transform a hank into a ball where the yarn emerges from the center of the ball; this making the knitting easier by preventing the yarn from becoming easily tangled. This transformation may be done by hand, or with a device known as a ballwinder. When knitting, some knitters enclose their balls in jars to keep them clean and untangled with other yarns; the free yarn passes through a small hole in the jar-lid.
The process of knitting has three basic tasks: (1) the active (unsecured) stitches must be held so they don't drop; (2) these stitches must be released sometime after they are secured; and (3) new bights of yarn must be passed through the fabric, usually through active stitches, thus securing them. In very simple cases, knitting can be done without tools, using only the fingers to do these tasks; however, hand-knitting is usually carried out using tools such as knitting needles or rigid frames. Depending on their size and shape, the rigid frames are called knitting boards, knitting rings (also called knitting looms) or knitting spools (also known as knitting knobbies, knitting nancies, or corkers). Other tools are used to prepare yarn for knitting, to measure and design knitted garments, or to make knitting easier or more comfortable.
About the Author
Himfr is a scholar, focusing his research on Chinese cultures. If you are interested in purchasing China goods, please visit www.himfr.com
|
US $135.78
