How to Use the Different Types of Sock Knitting Machines
Sock-knitting machines are used to make socks. You can also knit mittens, scarves using the sock-knitting machine. Sock knitting machines are antiques and they are not made any more. Sock knitting machines are very old, approximately. 80 to 100 years old. Its history dates back to 1800 and 1900 this was used at home only. It is very easy to knit a sock, in the sock-knitting machine. It takes an hour to knit a sock. Different sizes of socks can be made in the sock-knitting machine. One can make ankle socks, knee socks, men's and ladies, kid’s socks in the machine.
There are many easy to use -patterned sock yarns, sold in the market. These yarns can be used in the sock-knitting machine. Sport weight yarns are also used in the machine. Worsted weight yarns can be used also on the slot cylinders. This yarn does mock ribbing. Opal, Loma's laces, Regia, Trekking XXL and Alpaca yarns, are also used in the sock-knitting machine. It is very easy to learn the process of making sock using the sock-knitting machine. There are annual conferences, where people learn by attending classes.
There are different patterns and ways to knit socks, using the machine. There is a cylinder with slots for the needles in the machine and the needles have latches. When the needle passes in the cam shell path, the knitting is made. The first step is to setup a basket or bonnet which makes the needles move continuously. After the setup of bonnet, scrap or waste yarn should be used. When knitting, the yarn ball winder should be used to keep the yarn at an even tension. The main purpose of using the waste yarn, is when the sock is finished the yarn can be clipped and ribbed out. Now the hem of the sock is made. The number of rows should be counted when the carrier goes around the cylinder, while knitting. Hem top should be knitted by taking a stitch from the first row, and should be hanged on the needle.
A ribber is put on the machine, after the hem and purl stitches are made. When the ribber is put, the stitches are transferred from cylinder needle to ribber needle. After this, the ankle part of sock is knitted. Half of the stitches are transferred, from ribber needle to cylinder needle. This will create knit stitches on the ankle. The start and stop points are marked red on the cylinder, for the heel and toes. The heel is knitted on the front of the machine, and the back half needles are not used here. Once the heel is made, the foot we begin the foot of the sock. After the foot is made, the toe is made. Now the stitches of the ribber, are transferred to the cylinder needle. Ribber stitches are made on the top of the foot, and knitting stitches of the machine are made on the bottom of the foot. Now on the top of the toe, is made with Kitchener stitch. The sock has been knitted fully, by the sock-knitting machine.
About the Author
Muna wa Wanjiru Has Been Researching and Reporting on Knitting for Years. For More Information on Sock Knitting Machines, Visit His Site at SOCK KNITTING MACHINES
|
US $199.00
